top of page

Cabinet Refinishing Services

Cabinet refinishing is a great way to breathe some new life into your kitchen. You don’t need to buy a whole new set of cabinets to create an entirely new look and make your old kitchen feel new again. The cabinets are one of the most visually prominent aspects of a kitchen, and a new coat of our 1k or 2k poly from Renner Italian Wood Coating can make a big difference in your kitchen’s overall look and feel.


At Transtech Painting, our certified, qualified and licensed contractors can work with you to give your dull, dreary old cabinets a rejuvenating makeover.  We use state-of-the-art equipment (Surfrep and Festool sanders, Graco HVLP procomp 9.5, Graco and Titan fine finish sprayer, PSDR system, etc.) combined with the highest attention to detail, we can transform your cabinets into something completely different and unique - YOUR KITCHEN.

Our Cabinet Painting Process:

Remove doors/drawers off hinges, and number them accordingly.

remove _edited_edited.jpg

The finished surface is cleaned (de-greased if applicable) and scuff sanded. 

Shellac primer and 2 to 3 coats of poly wood coating or lacquer are applied depending on the color. We sand and check for imperfections after each coat.

Each step is done at separate locations, inside sealed spraying booths to prevent contamination.


Boxes opening are done on-site, in a fire-rated booth to prevent dust, and fume from coming out.

We carefully mask and cover the floor and other surfaces

Boxes are finished following the same steps as doors and drawers.

The doors/drawers are delivered and re-installed after 2 to 5 days.

We also install new handles upon agreement beforehand.

All products are applied using an airless sprayer or HVLP rigs to provide the most professional finish.

There are gaps between cabinets and kitchen walls due to the nature of the stained grade finish. We recommend painting the walls also so the gaps shall be caulked to provide a seamless finish.

bottom of page